Information

Dimension and weight: 162mm*77mm*112mm, 1.2kg

External Diameter of Inlet/Outlet: 20mm(thread)

Head:0-32m

Flow rate: 0-2000L/H

Driving Mechanism: Brushless, magnetic separation

Life span: 30000hrs

Noise: ≤35dB(A)

Waterproof level: IP68

Max. working temperature: -30℃-100℃

Suitable medium: water, oil, normal acid/alkaline(tested needed for special liquid)

Speed adjustable(Optional): PWM/0-5V analog signal/potentiometer

Constant power output: For example, a 12V(24V) 10W pump uses 12-18V(24-30V), the power is still 10W, and it can run continously.

Application

All kinds of system needs much higher pressure

1	Jam protection	When jam it will Stop to protect itself
2	Dry run protection	The pump will Stop(8S) and start(2s) repeatedly to protect itself(can be customized)
3	Overloading protection	When the voltage exceeds the rated power, the pump will stop
4	Reverse protection	Wrong connection of the power supply(positive and negative), the water pump will stop running, and then re-connected, can work normally.
	Controller Internal install		Suitable for external installation
	Controller External install		Suitable for high temperature or Corrosive liquid submersible installation

Flow Rate Curve

Dimension

How to choose a right pump for your system?

1. Confirm your operating voltage, current, head, flow, and the size of inlet & outlet. In general, there is no flow when the head achieve the maximum head marked by factory. So if you require the pump is able to meet a certain height and also meet a certain flow, you should choose a higher maximum head than you need. Please consult us or refer to the performance curves.

2. Confirm the shape requirements, such as the type of interface, the direction of inlet & outlet, etc.

3. Confirm the working environment, such as the temperature, the medium, etc.

4. Confirm the functional requirements, such as the time control, the flow control, the speed control, etc.

5. Please feel free to contact us if you have any questions need our help during choose the pump.

6. We own our moulding factory, have the ability and capacity to open the mould, so if your system needs special model, we can provide ODM/OEM service for you.

And highly welcome OEM/ODM!

Installation

Note: The pump is not self-priming pump. When install it, please make sure there is enough water in pump body. Meanwhile, the pump must be installed below the liquid level in the tank.

FAQ

How long is the delivery time?

Sample order is 3~5 days.

Bulk order is 10~15 days.

If there is pumps in stock, it is 2 days.

How long is the warranty of pump?

Warranty is 1 year.

What’s the payment method?

Paypal or T/T,Alipay

What certificates have your pumps passed?

All our products have passed CE, RoHS

High welcome OEM and ODM!

1.DC Low voltage safe and reliable
2.Three phase brushless sine wave control technology
3.Eliminate high-frequency electromagnetic noise, smooth and silent
4.The pump body and the drive can be separated and resistant to high temperature
5.Magnetic isolation design, leakage proof, waterproof grade IP68.
6.Acid, alkali and salt corrosion resistance, oil resistance, organic solvents and other liquid media (consult in advance)
7.Constant power can be customized (for example, 12V 80W water pump, Constant Power 80W with voltage varying between 12v-24v)
8.Constant speed can be customized (keep the speed unchanged when the load changes)
9.Accurate dry run protection and Jam protection based on current detection (programmable protection mechanism)
10.Soft start eliminates the peak voltage and reduces the starting current
11.Suitable for Music fountain and other high-frequency start- stop application
12.MPPT function can be customized for solar power supply to avoid poor startup when the light is weak.
13.The pump and pump control system can be customized for various application environment requirements